Publication
Semi-solid Constitutive Parameters and Failure Behavior of a Cast AA7050 Alloy
//www.veoveoc.com/en/publications/publication/1905681/
Mohammed Mhamdi
Research Manager
Mohammed Mhamdi
Research Manager
Phone:
982 83 949
Email:
Unit:
SINTEF Industry
Department:
Metal Production and Processing
Office:
Oslo
Publications and responsibilities
Publication
Modelling macrosegregation modification in dc casting of aluminium alloys in sheet ingots accounting for inlet melt flow, equiaxed grain morphology and transport
//www.veoveoc.com/en/publications/publication/1892538/
Publication
Mechanical Properties of AlSi10Mg Processed by Laser Powder Bed Fusion at Elevated Temperature
//www.veoveoc.com/en/publications/publication/1823512/
AlSi10Mg processed by laser powder bed fusion is expected to have remarkable mechanical properties due to the dominant cellular microstructure. However, the as-processed material is often both anisotropic and containing significant residual stresses. To mitigate these problems, a retrofitted...
Publication
Statistical analysis of structure loss in Czochralski silicon growth
//www.veoveoc.com/en/publications/publication/1749970/
Publication
Application of an Equiaxed Grain Growth and Transport Model to Study Macrosegregation in a DC Casting Experiment
//www.veoveoc.com/en/publications/publication/1691271/
Publication
Heat source management in wire-arc additive manufacturing process for Al-Mg and Al-Si alloys
//www.veoveoc.com/en/publications/publication/1693037/
Publication
Analysis of the Interplay Between Thermo-solutal Convection and Equiaxed Grain Motion in Relation to Macrosegregation Formation in AA5182 Sheet Ingots
//www.veoveoc.com/en/publications/publication/1721871/
Publication
Assessment of feature engineering and long short-term memory for structure loss identification from process data in monocrystalline silicon growth by the Czochralski method
//www.veoveoc.com/en/publications/publication/1762361/
Publication
(111)Si thin layers detachment by stress-induced spallation
//www.veoveoc.com/en/publications/publication/1722298/
In this work, results of controlled detachment of (111) silicon by stress induced spalling (SIS) process, which is based on a gluing on a metallic stressor layer by an epoxy adhesive on top of a silicon substrate, are presented. It is shown that silicon foils mainly (1 × 1) cm2 with different...
Publication
Investigation of pinholes in Czochralski silicon ingots in relation to structure loss
//www.veoveoc.com/en/publications/publication/1655178/